RM200 Cable Marking Unit
Application
The RM200 is used for circumferential markings of cables wires or cords using the proven hot stamping process. By means of pressure and heat, foil coated on one side with printing substance is pressed onto the material with a hot stamp. Two half-shells are used to obtain a circumferential marking. The unit is specially designed for short changeover from one cable diameter to another or from one color to another.
Later, the marking can be used as installation help, positioning, identification, dividing position, etc.
The RM200 can be used as bench unit with a foot pedal or inline connected to a feeder/cutter unit. Additionally, the ring marker and the control unit are installed separately to facilitate the inline working process.
Technical Data
Connected Load
- 115VAC, 230VAC, 50-60Hz, max. 200VA
Compressed Air Supply
Heating Control
Cable Ø Minimum
Cable Ø Maximum
Width of Stamp Form
Production Rate
- App. 1.0 seconds per stamping action (depends on dwell time)
Foil Type
- Available in different colors
Foil widths
Foil consumption
- Continuously variable up to 25mm
Measurements
- Marking Unit (open) L/W/H
400 x 470 x 400mm
- Marking Unit (closed): L/W/H
400 x 210 x 400mm
- Control Unit L/W/H
385 x 225 x 75mm
Weight
- Control Unit 13kg (28.6lbs)
- Marking Unit 6kg (13.2lbs)
For more information and to order, please contact us or call (619) 855-0046.
|